CASE OF PARTICLE ANALYSIS FOR SELECTED MATERIAL

Authors

  • Reza Bezerra School of Electrical and Computer Engineering, University of Campinas
  • Santos Prates School of Electrical and Computer Engineering, University of Campinas

DOI:

https://doi.org/10.51594/estj.v2i1.119

Keywords:

Cement, Material, Comparison, Portland. Laboratory.

Abstract

There are different types of material which can be used in laboratory settings. These materials possess different qualities. In this study, three types of cements including the Portland cement, calcium enhanced material, and the proroot MTA. For each category, 120 samples were taken and the average for Portland cement was 35.23 with SD of 5.23. The average of Calcium enhanced material was 41.87 with SD of 4.98. The average of Proroot MTA was 56.89 with SD of 6.73. The size range comparison based on particle analysis shows that among the three types, the MTA shows better results compare to the other types in terms of smaller particle range.

Published

2020-03-29

How to Cite

Bezerra, R., & Prates, S. (2020). CASE OF PARTICLE ANALYSIS FOR SELECTED MATERIAL. Engineering Science & Technology Journal, 2(1), 20-25. https://doi.org/10.51594/estj.v2i1.119

Issue

Section

Articles